Product description
- Dual Operator, 5 Stations
- Dual operator allows for two operators to work at the same time at full capacity
- 135 Ton punch station
- Keyed punch ram for safety
- Punch gauging table with fence and scale
- Die holder complete with 2″ die insert
- Punch nut with wrench & stripper
- Adjustable swing-away stripper
- One round punch & die: max. diameter 1-1/4″
- Jog control
- Two adjustable electric stroke controls with scale
- Two electric remote foot pedals
- Tandem Hydraulic Pump
- Two valves
- Angle shear
- Rectangle notcher with table, scale and guides
- Flat bar shear with sabre blade
- Shear table with miter fence
- Tool table work area
- Slug receptacles
- Electrical box supplied with emergency palm button and lock-out tag-out accommodations
- All guards necessary to comply with ANSI B11.5 safety standards
- Forklift accommodations
- Warranty: Three years on parts
- Made in USA
Punching Capacity | 135 ton 1-11/16″ in 1″ |
122 mt 42 mm in 25 mm |
Special Tooling | 4″ Max. Dia. | 102 mm Max. Dia. |
Throat Depth | 12″ | 305 mm |
Flat Bar Shear (Sabre Blade – Standard) |
24″ Length 1″ x 12″ 3/4″ x 20″ 1/2″ x 24″ |
610 mm 25 mm x 305 mm 19 mm x 508 mm 12 mm x 610 mm |
Angle Shear 90 degree | 6″ x 6″ x 1/2″ | 152 x 152 x 12 mm |
Angle Shear 45 degree w/Tool w/Bar Shear |
3″ x 3″ x 3/8″ 4″ x 4″ x 1/2″ |
76 mm x 76 mm x 10 mm 102 mm x 102 mm x 12 mm |
Brake 12″ | 90 ton | 81.6 mt |
Brake 24″ | 70 ton | 63.5 mt |
Open End Brake | Max. 1/4″ x 5″ [Flat or Angle Iron] |
6 mm x 127 mm |
Pipe Notcher Schedule 40 |
3/4″, 1″, 1-1/4″, 1-1/2″, 2″ | |
Rectangle Notcher | 3″ x 5-3/4″ x 1/2″ | 76 mm x 146 mm x 12 mm |
90 degree V-Notcher | 6″ x 6″ x 5/16″ 3″ x 3″ x 1/2″ |
152 mm x 152 mm x 8 mm 76 mm x 76 mm x 12 mm |
Notching in Leg of Channel | 6″ to 10″ | 152 mm to 254 mm |
Channel Shear | 2″ to 6″ adj. | 51 mm to 152 mm adj. |
Unistrut Shear | Samples Required | |
Rod Shear Round (max.) Square (max.) |
9 Cavity – 1/4″ to 1-1/4″ 1 Cavity – 1/4″ to 1″ |
6 mm to 32 mm 6 mm to 25 mm |
Square Tube Shear | 1/2″ to 2″ 12 gauge |
12 mm to 51 mm 0.105″ / 2.7 mm |
Picket Tool | 1/2″, 3/4″ & 1″ 16 gauge |
12 mm, 19 mm, 25 mm 0.06″ / 1.5 mm |
Weld Coupon Bender (max.) | 2″ wide x 3/8″ | 51 mm x 10 mm |
Offset Die Holder | Max. 40 ton | Max. 36 mt |
Strokes per minute in light material | 39 spm [Punch Station] | 1/4″ stroke |
Strokes per minute in heavy material | 15 spm [Punch Station] | 3/4″ stroke |
Hydraulics | 3,500/3,500 psi | 241/241 bar |
Motor Standard | 10 hp 208/230/460, 380/575v; 3 ph |
7.46 kW |
Motor Optional | 10 hp 220v, 1 ph |
7.46 kW |
Dimensions | L: 83″ W: 38-1/2″ H: 76-1/2″ |
L: 211 cm W: 98 cm H: 194.5 cm |
Shipping Weight (may vary) | 6,204 lbs. | 2,814 kg |
Reviews
There are no reviews yet.