Product description

• Dual Operator, 5 Stations
• Dual operator allows for two operators to work at the same time at full capacity
• 70 Ton punch station
• Keyed punch ram for safety
• Punch gauging table with fence and scale
• Die holder complete with 2″ die insert
• Punch nut with wrench & stripper
• Adjustable swing-away stripper
• One round punch & die: max. diameter 1-1/4″
• Jog control
• Two adjustable electric stroke controls with scale
• Two electric remote foot pedals
• Tandem Hydraulic Pump
• Two valves
• Angle shear
• Rectangle notcher with table, scale and guides
• Flat bar shear with sabre blade
• Shear table with miter fence
• Tool table work area
• Slug receptacles
• Electrical box supplied with emergency palm button and lock-out tag-out accommodations
• All guards necessary to comply with ANSI B11.5 safety standards
• Forklift accommodations
• Warranty: Three years on parts
• Made in USA

Punching Capacity	70 ton 1-1/8″ in 3/4″	63 mt 29 mm in 19 mm
Special Tooling	4″ Max. Dia.	102 mm Max. Dia.
Throat Depth	9″	229 mm
Flat Bar Shear (Sabre Blade – Standard)	24″ Length 1″ x 6″ 3/4″ x 10″ 1/2″ x 14″ 3/8″ x 24″	610 mm 25 mm x 152 mm 19 mm x 254 mm 12 mm x 356 mm 10 mm x 610 mm
Angle Shear 90 degree	6″ x 6″ x 1/2″	152 mm x 152 mm x 12 mm
Angle Shear 45 degree w/Tool w/Bar Shear	3″ x 3″ x 3/8″ 4″ x 4″ x 1/2″	76 mm x 76 mm x 10 mm 102 mm x 102 mm x 12 mm
Brake 12″	65 ton	59 mt
Brake 24″	45 ton	40 mt
Open End Brake	Max. 1/4″ x 5″ [Flat or Angle Iron]	6 mm x 127 mm
Pipe Notcher Schedule 40	3/4″, 1″, 1-1/4″, 1-1/2″, 2″
Rectangle Notcher	3″ x 5″ x 3/8″ 3″ x 4″ x 1/2″	76 mm x 127 mm x 10 mm 76 mm x 101 mm x 12 mm
90 degree V-Notcher	6″ x 6″ x 5/16″ 3″ x 3″ x 3/8″	152 mm x 152 mm x 8 mm 76 mm x 76 mm x 10 mm
Notching in Leg of Channel	6″ to 10″	152 mm to 254 mm
Channel Shear	2″ to 6″ adj.	51 mm to 152 mm adj.
Unistrut Shear	Samples Required
Rod Shear Round (max.) Square (max.)	9 Cavity – 1/4″ to 1-1/4″ 1 Cavity – 1/4″ to 1″	6 mm to 32 mm 6 mm to 25 mm
Square Tube Shear	1/2″ to 2″ 12 gauge	12 mm to 51 mm 0.105″ / 2.7 mm
Picket Tool	1/2″, 3/4″& 1″ 16 gauge	12 mm, 19 mm, 25 mm 0.06″ / 1.5 mm
Weld Coupon Bender (max.)	2″ wide x 3/8″	51 mm x 10 mm
Offset Die Holder	Max. 40 ton	Max. 36 mt
Strokes per Minute in Light Material	38 spm [Punch Station]	1/4″ Stroke
Strokes per Minute in Heavy Material	15 spm [Punch Station]	3/4″ Stroke
Hydraulics	3,000/3,000 psi	207/207 bar
Motor Standard	10 hp 208/230/460, 380/575v; 3 ph	7.46 kW
Motor Optional	10 hp 220v, 1 ph	7.46 kW
Dimensions	L: 69″ W: 37-1/2″ H: 71″	L: 175 cm W: 95 cm H: 180 cm
Shipping Weight (may vary)	3,800 lbs.	1,724 kg