• 12 John Road, Unit F Sutton MA 01590-2507
  • Call us
    508-581-9922
  • Mail us
    aclark@northernmachinerysales.net
  • Hours
    Mon-Fri 8-5/Sat-Sun by appointment

CPO 350 AUTOLOADER

  1. Home
  2. Saws
  3. Cold Saws
  4. CPO 350 AUTOLOADER

CPO 350 AUTOLOADER

FULLY AUTOMATIC SAWING SYSTEM

Automatically run unlimited cut lists at 90° Available for ferrous and non-ferrous materials

This auto loading circular cold saw is made to enhance performance. Our CPO 350 AutoLoader is a fully automatic sawing system guaranteed to save time, reduce scrap and eliminate costly mistakes. Automatically run unlimited cut lists at 90° OR miter cut in a semi-automatic mode; consistently producing accurate cut lengths within ±0.002 per dia. inch in squareness.

We’ve taken our trusted semi-automatic CPO 350 PKPD saw and added an automatic material loading system creating a fully automatic sawing system which can cut multiple lengths of tuve (max 3″ dia.). Available for ferrous and non-ferrous materials; this saw comes standard with a Windows® based touch screen control, 5ph variable rpm speed motor, 315mm diameter blade, and the ability to run unlimited cut lists from 1/2″ to 23′ lengths. Proudly made in the USA.

Categories: , InquireHave one to Sell?Call Now

Product description

  • Fully automatic cycle or semi-automatic operation (available In ferrous or non-ferrous)
  • Pneumatic power down feed with electric controls
  • Adjustable stroke control
  • Adjustable down feed control on the saw head for feed rate
  • Air operated material vise clamp
  • Clamping on both sides of the blade
  • Fixed rear vise
  • Double reduction, hardened and ground worm and wheel gear box (ferrous model)
  • Chip drawer
  • Emergency stop button
  • Clear awareness barrier with safety interlock switch
  • Mist coolant lubrication system
  • Miter in one direction only (manually)
  • Semi-auto operation is standard for cutting miters
  • Automatic loading & trim cut of each new bar
  • Piece counter
  • Touch screen controls actuate the complete cycle
  • Windows base software (includes profile screen)
  • Unlimited job storage
  • Infeed table type: Bundle Loader or Supply Track
  • One saw blade
  • One gallon coolant
  • Complies with ANSI B11.10 safety standards
  • Warranty: Two years on parts (CPO saw)
  • Warranty: One year on parts (feed system)
  • Made in USA
Cutting Speeds
(must specify when ordering)
 CPO 350 AutoLoader (ferrous) Variable Speed
11 to 177 rpm		 Motor Rate:
5 hp
CPO 350 AutoLoader NF (non-ferrous) 3,000 rpm Motor Rate:
5 hp
Maximum Cutting Capacities
(based on mild steel)
 TUBING

Round
Square

 90 Degree

3″ (76 mm)
3″ x 3″ (76 x 76 mm)

 45 Degree

2″ (51 mm)
2″ x 2″ (51 x 51 mm)
SOLID

Round

 90 Degree

1-3/4″ (45 mm)

 45 Degree

1-1/2″ (38 mm)
Maximun Cutting Capacities (NF)
(Non-Ferrous & PVC )		 SOLID (NF)

Round
Square

 90 Degree

3″ (76 mm)
3″ x 3″ (76 x 76 mm)

 45 Degree

2″ (mm)
2″ x 2″ (51 x 51 mm)
Length Tolerance ± 0.015 repeatability
Squareness Tolerance ± 0.002″ per diameter inch
Minimum Cut Length 1/2″ 12 mm
Maximum Cut Length 23′ 9″ 724 cm
Motor Options (Factory Wired) Specify:
208/230/460v, 3 ph
Air Pressure 90 psi
Maximum Saw Blade 350mm
Arbor Bore Size 40mm
Pin Spacing 4/12/64
Must Specify Infeed Table Type ↓
12′ Supply Table (ST)
 Maximum Raw Stock (12′ ST) 12′
Load Table Capacity (ST) 24″
Dimensions – 12′ ST w/ Saw (L)236″ (W)47″ (H)68″
24′ Supply Table (ST)
 Maximum Raw Stock (24′ ST) 24′
Load Table Capacity (ST) 24″
Dimensions – 24′ ST w/ Saw (L)377″ (W)47″ (H)68″
Bundle Loader (BL)
 Maximum Raw Stock (BL) Up to 24′
Maximum Lifting Capacity (BL) 4,000 lbs
Dimensions – 24′ BL w/ Saw (L)377″ (W)91″ (H)68″

Reviews

There are no reviews yet.

Be the first to review “CPO 350 AUTOLOADER”

Related products