CPO 350 PK

Product description

Air operated double self-centering vise assures burr-free cuts
Operator controlled trigger switch
Miter capabilities 45 degrees left to 45 degrees right
Miter locking device: Quick, accurate settings-stops at 45 degrees left, 90 degrees, and 45 degrees right
Capable of slotting
Double reduction, hardened and ground worm and wheel gear box
Chip drawer
7 Gallon flood coolant tank with pump
One 315 mm diameter HSS blade
One blade wrench
One gallon coolant
Complies with ANSI B11.10 safety standards
Warranty: Three years on parts
Made in USA

Cutting Speeds (must specify when ordering)	LT(Low Turn) – designed for solid mild steel, solid stainless steel & thick wall pipe	LT (Low Turn) 22 / 44 rpm	Motor rate: 3 hp
	HT(High Turn) – designed for thin wall tube 0.060 wall thickness or thinner and non-ferrous material	HT (HighTurn) 44 / 88 rpm	Motor rate: 3 hp
	VS (Variable Speed) ~ wired 230/460, 3-ph	VS (Variable Speed) 11 to 177 rpm	Motor Rate: 5 hp
	VS (Variable Speed) ~ wired 220, 1-ph	VS (Variable Speed) 11 to 177 rpm	Motor Rate: 5 ph
	SS (Single Speed) – designed for 220v 1ph applications	SS (Single Speed) 44 rpm	Motor Rate: 3 hp
Maximum Cutting Capacities (based on mild steel)	TUBING Round Square Rectangle	90 Degree 4-1/2″ (114 mm) 4-1/4″ x 4-1/4″ (108 x 108 mm) 5-1/2″ x 4″ (140 x 102 mm)	45 Degree 4″ (102 mm) 3-3/4″ x 3-3/4″ (95 x 95 mm) 3-3/4″ x 3-3/4″ (95 x 95 mm)
Maximum Cutting Capacities (based on mild steel)	SOLID Round Square	90 Degree 1-3/4″ (44 mm) 1-3/4″ x 1-3/4″ (44 x 44 mm)	45 Degree 1-1/2″ (38 mm) 1-1/2″ x 1-1/2″ (38 x 38 mm)
Motor Options (Factory Wired)	Specify: LT & HT: 208/230/460/575v, 3 ph; 220v, 1ph VS: 230/460v 3ph; 220v, 1ph SS: 220v, 1ph
Maximum Diameter Blade	350 mm
Arbor Bore	40 mm
Pin Spacing	4/12/64
Width	21-7/8″	55.5 cm
Depth	43-1/2″	110.5 cm
Height (not including feed handle)	56-1/4″	143 cm
Height (floor to vise)	37-7/16″	95 cm
Shipping Weight (may vary)	690 lbs.	313 kg

There are no reviews yet.