• Abrasive belt size: 40” x 75”
• Motorized Table Lift with computer display
• Variable Speed Conveyor
• Conveyor Forward & Reverse
• Belt Safety Overtravel Switches
• Electronic Eye Belt Tracking. Belt tracking adjusting lever ( Belt Trimmer ) to Re-adjust the tracking system when running extremely out of parallel belts
• 4-Jackscrew Table Support
• Double Infeed & Outfeed Pinch Rolls with protective guards
• Conveyor Belt Tracking System
• Safety System with Disc Brake. Air operated disc brakes to stop sanding head in 3-5 seconds in the even of loss of air pressure or activation of any emergency stop device
• Table Height Digital Readout
• Load Meter indicates percentage of full motor loads
• Belt change door electrically interlocked for safety purpose
• Air tensioning of belt for accurate tensioning & compensation of belt stretch
• Quick release sanding head support for fast belt change
• Dust collection hood with 6” outlet is located adjacent to abrasive head in sanding area
• Emergency stops from almost any point
• Noise level bellows 82 dba
• Operation manual, control tags, danger signs, and warning labels in English on machine
• 208/230V, 3-Phase
• One year Industrial Warranty for parts

• Prices are for 208-230 VOLTS
• Total amps 60 @ 230/3/60
• COMPRESSED AIR REQUIRED:  2 CFM @ 90 PSI

CAUTION: If fire hazardous materials, such as aluminum, titanium, magnesium, etc., are to be processed, a dust collection system that conforms to National Fire Protection Association (NFPA) should be used.

WET DUST COLLECTORS use a water filled tank through which all grinding dust is pulled by a motor driven impeller fan.  Particles sink to the base of the tank where they can easily be removed by raking into a provided container.  Normal tap water is used, there are no filter bags to be changed. Water level is automatically controlled when unit is connected to a water supply.  All units are equipped with explosion relief door and sound silencer.