Product description

• Dual Operator, 5 Stations
• Dual operator allows for two operators to work at the same time at full capacity
• 120 Ton punch station
• Keyed punch ram for safety
• Punch gauging table with fence and scale
• Die holder complete with 2″ die insert
• Punch nut with wrench & stripper
• Adjustable swing-away stripper
• One round punch & die: max. diameter 1-1/4″
• Jog control
• Two adjustable electric stroke controls with scale
• Two electric remote foot pedals
• Tandem Hydraulic Pump
• Two valves
• Angle shear
• Rectangle notcher with table, scale and guides
• Flat bar shear with sabre blade
• Shear table with miter fence
• Tool table work area
• Slug receptacles
• Electrical box supplied with emergency palm button and lock-out tag-out accommodations
• All guards necessary to comply with ANSI B11.5 safety standards
• Forklift accommodations
• Warranty: Three years on parts
• Made in USA

Punching Capacity	120 ton 1-1/2″ in 1″	108 mt 38 mm in 25 mm
Special Tooling	4″ Max. Dia.	102 mm Max. Dia.
Throat Depth	12″	305 mm
Flat Bar Shear (Sabre Blade – Standard)	24″ Length 1″ x 12″ 3/4″ x 20″ 1/2″ x 24″	610 mm 25 mm x 305 mm 19 mm x 508 mm 12 mm x 610 mm
Angle Shear 90 degree	6″ x 6″ x 1/2″	152 mm x 152 mm x 12 mm
Angle Shear 45 degree w/Tool w/Bar Shear	3″ x 3″ x 3/8″ 4″ x 4″ x 1/2″	76 mm x 76 mm x 10 mm 102 mm x 102 mm x 12 mm
Brake 12″	75 ton	55 mt
Brake 24″	55 ton	40 mt
Open End Brake	Max. 1/4″ x 5″ [Flat or Angle Iron]	6 mm x 127 mm
Pipe Notcher Schedule 40	3/4″, 1″, 1-1/4″, 1-1/2″, 2″
Rectangle Notcher	3″ x 5-3/4″ x 1/2″	76 mm x 146 mm x 12 mm
90 degree V-Notcher	6″ x 6″ x 5/16″ 3″ x 3″ x 1/2″	152 mm x 152 mm x 8 mm 76 mm x 76 mm x 12 mm
Notching in Leg of Channel	6″ to 10″	152 mm to 254 mm
Channel Shear	2″ to 6″ adj.	51 mm to 152 mm adj.
Unistrut Shear	Samples Required
Rod Shear Round (max.) Square (max.)	9 Cavity – 1/4″ to 1-1/4″ 1 Cavity – 1/4″ to 1″	6 mm to 32 mm 6 mm to 25 mm
Square Tube Shear	1/2″ to 2″ 12 gauge	12 mm to 51 mm 0.105″ / 2.7 mm
Picket Tool	1/2″, 3/4″, 1″ 16 gauge	12 mm, 19 mm, 25 mm 0.06″ / 1.5 mm
Weld Coupon Bender (max.)	2″ wide x 3/8″	51 mm x 10 mm
Offset Die Holder	Max. 40 ton	Max. 36 mt
Strokes per Minute in Light Material	39 spm [Punch Station]	1/4″ Stroke
Strokes per Minute in Heavy Material	15 spm [Punch Station]	3/4″ Stroke
Hydraulics	3,500/3,500 psi	241/241 bar
Motor Standard	10 hp 208/230/460, 380/575v; 3 ph	7.46 kW
Motor Optional	10 hp 220v, 1 ph	7.46 kW
Dimensions	L: 83″ W: 38-1/2″ H: 76-1/2″	L: 211 cm W: 98 cm H: 194.5 cm
Shipping Weight (may vary)	6,204 lbs.	2,814 kg