Product description

The Tin Knocker 1014 Hydraulic Box and Pan Brake and Straight Brake brings power, strength and repeatability. Save time and money with TK 1014 Hydraulic Brake.

Description:

This model functions as either a finger brake or a straight brake. It features a standard box‑and‑pan design and includes an attachable straight nose bar. With a bending capacity of 14‑gauge (2 mm) mild steel up to 10 feet, it easily forms light‑gauge sheet metal within its rated limits. Designed for both manufacturing and maintenance environments, this heavy‑duty hydraulic leaf brake is a reliable and valuable addition to any metal‑forming operation.

FEATURES

 STANDARD EQUIPMENT: Removable Nose Bar, Bolted Bottom Bar, Compact Hydraulic Power Unit, Angle Bar, Insert Bar, Oil Level Sight Gauge and 28 Box & Pan Fingers

Control Panel Features: On/Off Key Selector Switch, Bending Leaf Up/Down Pushbuttons, Clamp/Unclamp Pushbuttons, Motor Start Pushbutton, Emergency Stop Push Button, Automatic Cycle Push Button

Electric Foot Switch – Clamps and unclamps Top Leaf. Allows operator mobility when loading and unloading material.

Bend Angle Dial Adjustment – Adjustable cam and scale that read in degrees, actuates an electric limit switch for bend angle control and repeatability of bends. Adjustable Bending Angle for repeatability with scale

Material Thickness Dial Adjustment – Reference scale for speedier set up when adjusting clamping pressure.

Back Gauge – 25 1/2″ travel, rack and pinion type gauge with hand wheel adjustment on right side of machine. Inch/Cm scales. Crossbar Travel, 20 IPM crossbar speed with sheet support rods

• Adjustable top leaf, open height adjustment
• Two Position Bending Leaf Angle Bar
• 6” Box Depth when using box and pan fingers
• Hardened Tooling, both finger and straight nose bar.
• Standard Motorized Back gauge with GO TO positioning
• Compact Hydraulic Power Unit with direct pump
• Manifold Mounted Directional Valves
• Large Cylinder Attached to massive Hinge
• Adjustable Clamp Pressure with mechanical overlock and reference scale

SPECIFICATIONS

• Max Bending Length:                   120” Inches
• Number and Width of Fingers:           6-3″, 10-4″,10-5″ 2-6″
• Maximum thickness:                     14-gauge mild steel.
• Electrical:                                      3HP, 3PH, 230Volt, 15amp
• Dimensions:                                   Approx 150” x 48” x57”
• Shipping Weight:                          5,500 lbs.