Product description
The Prima W62Y-2×2500 is a hydraulic folding machine with NC control of the bending angle and backgauge, with a 98 in folding width and capacity up to 14 ga mild steel.
Standard Features
- Full welded-steel plate construction, vibration-aged after welding so the frame stays true.
- Hydraulic clamp and unclamp from the foot switch — one operator runs the machine with both hands free on the material; clamping adjusts in 3/8-inch increments; unclamping controlled from the same foot switch.
- Rapid head adjustment handles reposition the head for different material sizes.
- High-carbon steel clamping fingers and high-tensile steel apron blade.
- Automatic cycle: clamps, apron rises to the set angle, returns, head unclamps to the operator-set amount; manual control also provided.
- Heavy clamping rams fed through steel pipe.
- Segmented upper tooling with 4.3-inch open height for pan, box, and disc work.
- Siemens electrical components; 24V foot switch, overload protected.
Specifications
| Folding width | 98 in (8 ft 2 in) |
| Maximum thickness | 0.079 in (approx. 14 ga mild steel) |
| Folding angle | 0-120 degrees |
| Maximum open height | 4.3 in |
| Motor | 5.4 HP |
| Overall dimensions | 146 in L x 65 in W x 65 in H |
Call or email for price — Arthur Clark, 508-581-9922 ext. 101 · Call/text 508-365-8395 · Service (Tony Demaio) ext. 102.
Built for HVAC Duct Shops Fabricating TDC / TDF Ductwork
TDC (Transverse Duct Connector) and TDF (Transverse Duct Flange) ductwork is joined with an integral flange formed from the duct wall itself — no separate angle-iron frames — and the folding work is what brings those flanged blanks into finished duct. The Prima W62Y-2×2500 is the folder for that work: it folds duct sections and fittings for TDC/TDF systems in sheet up to 14 ga across a full 98 in width, with a 0–120° folding range for the slips, drives, offsets, and transitions duct shops run every day. NC control of the bend angle and backgauge keeps every fold repeatable, so flanges line up corner to corner when the corner pieces and cleats go on. Segmented fingers handle the box and pan work — fittings, transitions, and pans — and hydraulic clamping lets one operator run the machine with both hands free on the material. If your shop fabricates TDC/TDF ductwork, this is the folding machine that keeps up with your flange former.
Outline Drawing

Download the outline drawing (PDF — dimensions in inches)
This drawing shows the 8 ft, 14 ga model (W62Y-2×2500). The standard folder is equipped with a 5 ft bending leaf. Drawings for the other sizes are available on request — just ask us.



Reviews
There are no reviews yet.