• 12 John Road, Unit F Sutton MA 01590-2507

X

Genie Has Arrived: Personnel Lifts & Material Lifts, Sold and Serviced in Sutton, MA

Northern Machinery Sales is now an authorized Genie distributor, offering Genie personnel lifts and material lifts from our Sutton, Massachusetts shop. Genie, a Terex brand, builds the AWP Super Series personnel lifts, the Superlift Advantage SLA and Superlift Contractor SLC material lifts, and the Genie Lift GL material lifts now available at Northern.

Genie AWP Super Series personnel lift

See the full lineup on our new Genie brand page.

AWP Super Series Personnel Lifts

The Genie AWP Super Series is a portable personnel lift for one person, with working heights from 26 ft 1 in to 46 ft 3 in. It sets up in minutes with outriggers, fits through a standard doorway, and is built for indoor maintenance, construction and facility work. Models at Northern: the AWP-20S, AWP-25S, AWP-30S, AWP-36S and AWP-40S.

Superlift Advantage SLA Material Lifts

The Genie Superlift Advantage SLA is a manual hand-winch material lift with a telescoping mast. One person can operate it, and it lifts loads with forks up to 26 ft 0.5 in. Models at Northern: the SLA-5, SLA-10, SLA-15, SLA-20 and SLA-25.

Superlift Contractor SLC Material Lifts

The Genie Superlift Contractor SLC is a manual hand-winch material lift with a telescoping mast, built for jobsite material handling. Models at Northern: the SLC-12, SLC-18 and SLC-24.

Genie Lift GL Material Lifts

The Genie Lift GL is a compact, portable material lift. One person can operate it, and it is built for moving and placing loads in tight spaces. Models at Northern: the GL-4, GL-8, GL-10 and GL-12.

Sales, Service and Parts in Sutton, MA

Northern Machinery Sales sells and services Genie lifts from our Sutton, Massachusetts shop, serving customers across Massachusetts and New England. For service or parts on your Genie lift, contact Tony Demaio at 508-581-9922 ext. 102 or ademaio@northernmachinerysales.net.

Call or email for price.
Shop: 508-581-9922 (Arthur Clark ext. 101, Tony Demaio ext. 102, Ron Mason ext. 103)
Call or text: 508-365-8395
aclark@northernmachinerysales.net
Northern Machinery Sales Inc., 12 John Road, Unit F, Sutton, MA 01590

Read More

Cool Machines Has Arrived: Insulation Blowing Machines & Vacuums, Sold and Serviced in Sutton, MA

Northern Machinery Sales now sells and services Cool Machines insulation equipment from our shop in Sutton, Massachusetts. Cool Machines builds insulation blowing machines and insulation removal vacuums, and we now carry the full line — six blowing machines and seven vacuums.

Cool Machines CM-2400 insulation blowing machine

Insulation Blowing Machines

From the compact CM-700 for attics and sidewalls to the truck-mounted CM4500XL “Big Dog” with a 132 cu ft total hopper system, there is a Cool Machines blower for every size of job. The lineup: CM-700, CM-1500, CM-2400, CM3000XL, CM3500XL and CM4500XL — blowing cellulose, fiberglass and rockwool at up to 5,400 lbs/hr of cellulose.

Insulation Removal Vacuums

The CoolVac line removes old insulation fast — without the mess. We carry the CoolVac-11, CoolVac-16, CoolVac-23, CoolVac-35, CoolVac 40, the diesel-powered CoolVac-25 and the electric E-Vac line (E-Vac 5, 7, 10 and 20). A Vacuum Saver is required for warranty consideration — ask us about adding one to your vacuum.

Service & Repair in Sutton, MA

We do not just sell these machines — we service them. Our Sutton shop repairs insulation blowing machines and vacuums: airlock seals and blades, blowers and filters, agitators and shredders, hoses, remotes and controls, bearings, belts and electrical. For service, contact Tony Demaio at 508-581-9922 ext. 102 or ademaio@northernmachinerysales.net.

See the full lineup on our Cool Machines page. For sales, call Arthur Clark at 508-581-9922 ext. 101, or text 508-365-8395. Northern Machinery Sales, 12 John Road, Unit F, Sutton, MA 01590.

Read More

What Actually Kills Insulation Blowing Machines — Five Things We See in Our Shop

Another insulation blowing machine arrived at our Sutton shop today, on a pallet, and a two-minute walk-around showed the same failure patterns we see again and again. If you run insulation crews, this list will look familiar — because most blower breakdowns aren’t bad luck. They’re the same five things, and most of them are preventable.

1. Burned and broken electrical connections.

Burned and broken electrical power inlet prongs on an insulation blowing machine

Look at the power inlets on a hard-used blower — one for each blower motor and the agitator — and you’ll often find prongs bent, snapped, or heat-scarred. Loose-fitting plugs arc, arcing burns contacts, and burned contacts strand a crew mid-job. Jobsite cords, adapters, and yanking plugs out by the cord all feed this one.

2. Airlock wear and material buildup.

Airlock on an insulation blowing machine caked with material

The rotary airlock is the heart of the machine — it meters material into the airstream. Material cakes onto the star wheel and seals, clearances open up, output falls off, and the machine starts blowing weak and uneven long before it quits outright. By the time it stops feeding entirely, it’s usually been declining for months.

3. Clogged intakes and filters.

Blowers live in the dustiest environment in construction. The caution label on the machine itself warns about keeping the intake air clean — and it’s the single most ignored instruction on the unit. A starved blower runs hot, works harder, and wears everything downstream faster.

4. Corrosion and jobsite wear.

These machines ride in trucks and trailers, sit in damp garages, and get hosed down or rained on. Rusty fasteners, corroded fittings, and tired hoses and couplers are on almost every unit that comes through our door.

5. Skipped maintenance, full stop.

Nearly everything above traces back to the same root: the machine never got cleaned, inspected, or serviced until it stopped. A blower is a production machine — treated like one, with a cleaning and inspection routine, most of these failures never happen.

Why November makes it urgent.

Insulation season is peaking right now. A blower that dies in July is a problem; a blower that dies in November is a crew standing idle in the busiest weeks of the year. If your machine is blowing weak, running hot, tripping breakers, or showing burned plugs, that’s the machine telling you what’s next — get it looked at before it chooses the day for you.

What we do.

Northern Machinery Sales services insulation blowing machines at our Sutton, Massachusetts shop — diagnostics, electrical repair, airlock and blower work, and honest advice on the repair-versus-replace line. We’re also a Cool Machines dealer, so if yours is truly done, we can put a new machine under you instead. For service questions, contact Tony Demaio, who runs our service department: 508-581-9922 ext. 102 · ademaio@northernmachinerysales.net.

Watch for the follow-up: this machine, back together and blowing the way it should.

Read More