Schulz — Air Compressors, Dryers & Shop Air Systems
Northern Machinery Sales now carries Schulz Compressors — rotary screw and piston compressors, refrigerated air dryers and air treatment for fabrication shops, auto shops and HVAC shops across New England. Schulz Compressors was founded in 1963 in Joinville, Brazil, and is the largest air compressor manufacturer in Latin America. Its US operation, Schulz of America, Inc., has served the United States from Acworth, Georgia since 1999.

Schulz Compressors & Shop Air Systems
- Rotary screw compressors: SRP 3000 Compact (tank-mounted), SRP 4000 Dynamic (fixed speed) and SRP 4000 Flex (variable speed, 10–250 HP)
- Piston compressors: V-Series two-stage, L-Series heavy-duty and Audaz MCSV lines, plus oil-free MSV, CSD and MSW models
- ADS refrigerated air dryers, 10–480 CFM, plus coalescing filters and cyclone condensate separators
- Compressor pumps for OEM builds and replacements, and air receivers
- Sized as a system — compressor, dryer and treatment matched to your shop, and serviced by Northern
How to Size Shop Air for a Fabrication Shop
Size shop air in CFM at pressure — not by horsepower alone. Add up the air each tool uses at the pressure it needs: a laser cutter, a press brake, air tools and blow-off guns all draw at different rates, and they rarely all run at once, so size for your real duty cycle with headroom for the busiest hour. Then check the pressure: most shop tools and lasers want 90–125 PSI at the tool, which means the compressor and dryer must deliver that pressure after filters and piping losses. And size the dryer to the compressor — a dryer that is too small leaves wet air in the lines.
Why dry air matters for laser cutting: wet air pits laser lenses and optics, rusts air lines and fittings, and leaves moisture in the cut that shows up as rough edges and dross. A refrigerated dryer and a coalescing filter ahead of the laser are cheap insurance against lens damage and bad cuts. If your shop runs lasers, talk to us before you buy — we will size the compressor, dryer and filters as one system.
SRP 3000 Compact Rotary Screw Compressors
The tank-mounted rotary screw for shops that need steady, quiet air without a separate receiver. The Compact line was developed to supply large volumes of air at a low noise level, with the compressor mounted on its own air receiver. 7.5 to 40 HP, 25 to 150 CFM at 125 PSI.

SRP 4000 Dynamic Rotary Screw Compressors
The fixed-speed rotary screw — the most compact of its kind in its class — delivering air in a constant, effective way for shops that run air all day. Direct transmission with no belts, continuous flow with no pulsations, and very low oil carryover. 7.5 to 50 HP, 25 to 207 CFM at 125 PSI.

SRP 4000 Flex Rotary Screw Compressors
The variable-speed rotary screw. Its variable speed drive changes motor speed to match your air demand, so the compressor only generates the air you actually use — saving energy and reducing motor wear. 10 to 250 HP, up to 1,212 CFM at 110 PSI.

V-Series Two-Stage Piston Compressors
Strong, durable two-stage V-twin piston compressors for dependable everyday shop air, in vertical or horizontal tank designs. 5 to 20 HP, up to 175 PSI.

L-Series Heavy-Duty Piston Compressors
The in-line L-Series pump is a new concept in pump design: reliable, highly efficient and low-noise. A workhorse for fabrication shops, auto shops and general shop air. 5 to 20 HP, 175 PSI.

Audaz MCSV Piston Compressors
Schulz’s most innovative piston compressor, built on exclusive patented technology. A 5 HP direct-coupling design delivering 20 CFM at up to 175 PSI, with an 80-gallon vertical or horizontal receiver.

Oil-Free Piston Compressors
Oil-free (oil-less) piston compressors for clean-air work — food and beverage, medical and dental air, electronics, paint and finishing — where oil in the air cannot be tolerated. MSV, CSD and MSW oil-less lines, as complete compressors and as bare pumps.

ADS Refrigerated Air Dryers
Refrigerated dryers that protect lasers, tools and paint work from moisture. The ADS non-cycling line runs from 10 to 480 CFM, with high-capacity (SMH) and high-temperature (SH) dryer lines also available.

Air Treatment Filters
Coalescing filters and cyclone condensate separators for clean, dry air at the point of use. FS coalescing filters from 47 to 1,324 CFM at up to 232 PSI.

Compressor Pumps & Air Tanks
Bare Schulz piston pumps — Max, Bravo, Audaz, MSI and oil-less lines — for OEM builds, replacement pumps and custom air systems. Schulz air receivers in 60, 80 and 120 gallons (up to 175 PSI) are also available — call us to add a receiver to your system.

New Schulz Models at Northern
Northern Machinery Sales now sells and services the full Schulz shop-air line: SRP 3000 Compact and SRP 4000 Dynamic and Flex rotary screw compressors, V-Series, L-Series and Audaz piston compressors, oil-free piston compressors, ADS refrigerated air dryers, air treatment filters and compressor pumps. Call or email for price on any model — we will help you size it to your shop.
Schulz Sales & Service in Massachusetts
Northern Machinery Sales sells and services Schulz shop air systems from Sutton, Massachusetts. We size compressors, dryers and air treatment as a system — not as separate boxes — and we service what we sell. If you run lasers, press brakes and air tools, bring us your air demand and we will put together the system that keeps up with it.
Frequently Asked Questions
How do I get a price on a Schulz compressor?
Call the shop at 508-581-9922 or email aclark@northernmachinerysales.net. Tell us your tools, your pressure and your duty cycle and we will quote the right size.
What size compressor do I need for a laser cutter?
It depends on the laser and the cutting gas demand, but the rule is the same: size in CFM at the pressure the laser needs, then add a refrigerated dryer and a coalescing filter so the air at the lens is dry and clean. Call us and we will size it.
Do you service Schulz compressors?
Yes. Northern sells and services the Schulz line from Sutton, MA — compressors, dryers and air treatment, sized as a system and serviced by our team.
Do you sell dryers and filters too?
Yes — ADS refrigerated air dryers from 10 to 480 CFM, coalescing filters and cyclone condensate separators, matched to your compressor.
CALL 508-581-9922 | EMAIL US
Arthur Clark, ext. 101; Tony Demaio, ext. 102; Ron Mason, ext. 103 — or call/text 508-365-8395. Northern Machinery Sales Inc., 12 John Road, Unit F, Sutton, MA 01590.
