Product description

• Dual Operator, 5 Stations
• Dual operator allows for two operators to work at the same time at full capacity
• 85 Ton punch station
• Keyed punch ram for safety
• Punch gauging table with fence and scale
• Die holder complete with 2″ die insert
• Punch nut with wrench & stripper
• Adjustable swing-away stripper
• One round punch & die: max. diameter 1-1/4″
• Punch jog control
• Two adjustable electric stroke controls with scale
• Two electric remote foot pedals
• Tandem Hydraulic Pump
• Two valves
• Slug-less angle shear
• Rectangle notcher: can be converted to a V-notcher, 50 ton punch station, or open end brake
• Flat bar shear
• Shear table with miter fence
• Rod shear
• Slug receptacles
• Electrical box supplied with emergency palm button and lock-out tag-out accommodations
• All guards necessary to comply with ANSI B11.5 safety standards
• Forklift accommodations
• Warranty: Three years on parts
• Made in USA

Punching Capacity	85 ton 1-1/16″ in 1″	77 mt 27 mm in 25 mm
Special Tooling	4″ Max. Dia.	102 mm Max. Dia.
Throat Depth	14″	355 mm
Flat Bar Shear	20″ Length 1″ x 14″ 3/4″ x 20″	508 mm 25 mm x 355 mm 19 mm x 508 mm
Angle Shear 90 degree	6″ x 6″ x 1/2″	152 mm x 152 mm x 12 mm
Angle Shear 45 degree (w/Bar Shear)	4″ x 4″ x 1/2″	102 mm x 102 mm x 12 mm
Brake 12″	85 ton	77 mt
Brake 24″	85 ton	77 mt
Open End Brake (Notcher Station)	Max. 1/2″ x 6″ [Flat or Angle Iron]	12 mm x 152 mm
Open End Brake (Punch Station)	Max. 1/4″ x 5″ [Flat or Angle Iron]	6 mm x 127 mm
Pipe Notcher Schedule 40	3/4″, 1″, 1-1/4″, 1-1/2″, 2″
Rectangle Notcher	2″ x 4″ x 1/2″	51 mm x 101 mm x 12 mm
90 degree V-Notcher (Punch Station)	6″ x 6″ x 5/16″	152 mm x 152 mm x 8 mm
90 degree V-Notcher (Notcher Station)	3″ x 3″ x 1/2″	76 mm x 76 mm x 12 mm
Punch Attachment (Notcher Station)	50 ton 1-1/4″ in 1/2″	32 mm in 12 mm
Throat Depth w/Punch Attachment (Notcher Station)	4-7/16″	113 mm
Channel Shear	2″ to 6″	51 mm to 152 mm
Unistrut Shear	Samples Required
Rod Shear Round (max.) Square (max.)	4 Cavity – 1/2″, 3/4″, 1″, 1-1/2″ 1 Cavity – 1-1/2″	12 mm, 19 mm, 25 mm, 38 mm 38 mm
Square Tube Shear	1/2″ to 2″ 12 gauge	12 mm to 51 mm 0.105″ / 2.7 mm
Picket Tool	1/2″, 3/4″ & 1″ 16 gauge	12 mm, 19 mm, 25 mm 0.06″ / 1.5 mm
Weld Coupon Bender (max.)	2″ wide x 3/8″	51 mm x 10 mm
Offset Die Holder	Max. 40 ton	Max. 36 mt
Strokes per Minute in Light Material	45 spm [Punch Station]	1/4″ Stroke
Strokes per Minute in Heavy Material	18 spm [Punch Station]	3/4″ Stroke
Hydraulics	3,350/3,800 psi	231/262 bar
Motor Standard	10 hp 208/230/460, 380/575v; 3 ph	7.46 kW
Motor Optional	10 hp 220v, 1 ph	7.46 kW
Dimensions	L: 77-1/2″ W: 32-1/4″ H: 74″	L: 197 cm W: 82 cm H: 188 cm
Shipping Weight (may vary)	5,504 lbs	2,497 kg